Stabilised Chlorine Granules
Stabilised Chlorine Granules & Pool Water Sanitation
Stabilised Chlorine Granules
Stabilised Chlorine Granules are a very effective way of disinfecting your swimming pool as this will destroy bacteria in your pool. Chlorine Granules How To Use? Is best dissolved in a bucket of warm water and distributed around the pool. It is important that it is completely dissolved before adding to the pool or it can bleach the liner and make it go brittle over a period of time.
Swimming pool water must be sanitised to ensure the safety of bathers when using the pool. Chlorine is the most popular form of sanitation. It is highly effective for destroying algae and potential germs. Bromine is an alternative particularly if you have sensitive skin.
Chlorine Granules is the most widely-used chemical for swimming pool sanitisation, through ease of use it has gained popularity. It kills bacteria by undergoing a simple chemical reaction where chlorine breaks down into hypochlorous acid and hypochlorite ions, which then oxidise bacteria until they are neutralised or destroyed.
- Chlorine has a long shelf-life and can, therefore, be stored for long periods of time.
- It is available to consumers in many different forms. Most common is liquid or chlorine granules.
- Not only does it neutralise contaminants when it is first added to swimming pool water, but it also continues to neutralise long afterwards.
- Chlorine are chloramines and trihalomethanes, which cause skin and eye irritation to swimmers.
Tips for Maintaining the Water Quality
As much as we love to jump into the pool and enjoy a refreshing swim, it’s essential to maintain its cleanliness for our health and safety. The environment, including pollen and leaves, can constantly pollute your pool, while swimmers’ use of sun creams and lotions can contribute to the contamination. Although your pool may look sparkling and clean, it’s essential to understand that it’s not. Your filter will remove a lot of debris, but you still need to sanitize the water regularly to keep it clean.
Importance of Sanitizing Your Pool
Sanitising your pool is critical as it helps eliminate harmful bacteria and germs that can cause infections and illnesses. Keeping your pool clean will also help prolong the lifespan of your pool equipment and prevent algae growth, which can turn your pool green and uninviting.
Recommended Chemical Levels for Your Pool
To maintain your pool’s cleanliness, it’s important to ensure that your pool’s chemical levels are within the recommended parameters. Here are the recommended levels for your pool:
- Minimum: 1ppm – 7.2 pH
- Recommended: 2ppm – 7.4 pH
- Maximum: 3ppm – 7.6 pH
To adjust your pool water, you need to add 2 grams of chlorine to increase the free chlorine level in a pool containing 1000 litres of water. To reduce your pH, you must add 10 grams per day of pH reducer until it lowers to 7.4. If you need to increase your pH, you must add 10 grams per day of pH increaser until your reading is 7.4 for pH.
Maintaining Algaecide Levels for Crystal Clear Water
Having your pool chemical range within the correct parameters is just the first step. You must also maintain your algaecide levels for crystal clear water. Adding 25ml of the initial dose per 1000 litres of water, then 2ml every two weeks, can help you achieve this.
Caution When Handling Pool Chemicals
When handling pool chemicals, it’s crucial to exercise caution to prevent any accidents or damage to the pool’s equipment. Never mix pool chemicals, use a separate container for each of the chemicals, and add them to the water separately. Always add granules to the water, never water to the granules.
Wait Before Using Your Pool
After adding chemicals to your pool water, it’s advisable to wait at least 30 minutes before using your pool. Before adding chemicals to your pool, ensure that your circulation pump is running. Never add chemicals to the water while the pool is in use. Should you shock-dose your pool with chlorine, wait until the residual chlorine has dropped to 5ppm or below before using it again.
Testing Your Pool Water
To test your pool, you can use either test strips or tablets. Test strips are the easiest way to check the levels of your pool water, as they will test for both pH and chlorine levels. Tablets are a reliable way of testing your water, and they are very accurate. Having tested your water, you will need to adjust it accordingly. It’s an excellent idea to keep a record of all your readings so that you have something to refer back to. Should you have any problems, your local dealer should be able to test your water if you take in a pool sample.
Keeping your pool clean is essential for your health and safety. By maintaining your pool’s chemical levels within the recommended parameters, you can ensure that your pool is free of harmful bacteria and germs. It’s also important to exercise caution when handling pool chemicals, as they can be dangerous. By following these
Useful Information: Having a bucket with a lip makes it easier to add the chlorine granules. Alternatively you can use chlorine tablets which come in measured doses, making it easier to administer the correct dose. The disadvantage is they take longer to dissolve in the pool water. Another alternative is liquid chlorine which is much faster acting and can be either put in the skimmer or poured around the pool the pool while running the pump.
Warning: Should you get chlorine directly on your skin rinse off immediately. Should you get any in your eyes flush out immediately and seek medical help.
- make sure that you wear goggles to protect your eyes from the chlorine granules. Also a protective pair of gloves is advisable.
- Using a plastic bucket half fill with warm water. Then add the appropriate amount of chlorine granules to the water to your pool size.
- Mix the chlorine granules into the warm water until completely dissolved using a plastic or wooden stirrer.
- Turn on the pimp so that the chlorine disperses around the pool rather than settling on the base of the pool. Pour the diluted chlorine around the pool taking care not to spill any on your clothes, as it will bleach them and cause them to go into holes.
- Let the pump circulate the chlorine around the pool for one to hours until fully dispersed before swimming in the pool. Test the pool chemical level before using to make sure that it is safe to swim in. If you add chlorine at the end of use for the day still circulate the pump for one to two hours. Then leave overnight. Then test the water the next day before use to make sure that it is safe to swim in.
Water quality is affected by the effect of pH, which is affected by the alkalinity. pH levels that are too high or too low can cause cloudy water and make scaly deposits. Water balancing chemicals have a crucial part to play as they prevent damage to your pool and poor sanitation.
Balancing water in your pool means to bring the water balance to the correct level for safe bathing.
- Turn the pump on giving it time to circulate the water and release any air that may be trapped in the pipework.
- Before you start make sure that you put on gloves and most importantly goggles to protect your eyes.
- Remove the cover from the skimmer. Then open the container with the chlorine granules in. Then use a measure to dispense the correct amount of chlorine for the pool.
- Pour the chlorine granules directly into the skimmer making sure that the measure is inside the skimmer as you pour into the skimmer. Add the chlorine granules slowly so that it does not spill on the pool surround.
- When you have finished adding the chlorine, replace the skimmer cover correctly. Then continue to run the pump for approximately another one to two hours before testing to see if the chlorine is at the correct level for swimming.
Chemicals should always be diluted in a bucket of water stir until dissolved then add to swimming pool. Never add to pool without diluting as it will cause damage to the liner including colour loss and making it brittle. It will also have damaging effects on other types of pool finishes.
When chemicals are fully dissolved disperse evenly around the pool.
When adding pH plus to your pool, ensure that you wear appropriate protection for your eyes and wear gloves.
