- Additional information
- Reviews (0)
Our Latest pH Balancer Large Kit contains 1Kg pH Reducer (ph minus), 1Kg pH Increaser (ph plus) and 50 3-Way AquaSplash test strips
This product is used to decrease or increase the pH of your pool water. Right pH control of pool and spa water is essential to eliminate problems caused by pH being too low or high. If pH is too high the water becomes uncomfortable for bathers. Add this product if your test kit result indicates that the pH is too high (pH Reducer) or too low (pH Increaser).
Directions for use:
Test the pH of your water on a regular basis. The pH of your water should be
maintained between 7.2 and 7.8 with an ideal reading of 7.4. This will allow the most effective use of other swimming pool chemicals.
Dose Rate is the same for pH Minus as for pH Plus
Pool volume 4,55 M³ (4,545)(ltrs) Pool Volume 1,000Gallons 50gDose Rate
Pool volume 11,36 M³ (11,364)(ltrs) Pool Volume 2,000Gallons 125gDose Rate
Pool volume 22,73 M³ (22,730)(ltrs) Pool Volume 5,000Gallons 250gDose Rate
Pool volume 45,45 M³ (45,455)(ltrs) Pool Volume 10,000Gallons 500gDose Rate
Pre-dissolve the granules into 10 litres of water, using a clean plastic container
and mix carefully. Slowly pour the solution into the pool water near to the return
inlets and rinse container out thoroughly.
To obtain maximum benefit from the chlorine, the pH of the pool & spa water should be maintained around 7.4 and between 7.2 & 7.8 at all times. Above 7.8 the efficiency of the chlorine will be reduced.
You can also buy those products separately.
For larger size, please see products below.
Only logged in customers who have purchased this product may leave a review.