Description
These non stabilised chlorine granules are ideal for shock dosing or regular oxidisation of swimming pool water. However, they may be used for routine disinfection.
Directions for use:
Add granules directly to the deep end of the pool with the circulation running. Broadcast the required at a level close to the water surface ensuring granules will not get blown back towards you. 2 hours after application of this product test free chlorine and if it is in the ideal range of 1-3mg/l (ppm) then pool use can recommence. If it is still below 1mg/l repeat application, but if still above 5mg/l (ppm) keep circulation running and repeat in 2-4 hours. After shock treatment procedures allow the chlorine to drop below 5 ppm before bathing recommences, and in any event wait for at least 30 minutes before bathing recommences.
Application:
Pool Volume: 4545L (1000 gallons) To Increase Chlorine level 1mg/l (ppm) add 7g To increase Chlorine level 5mg/l (ppm) add 25g
Pool Volume: 11364L (2500 gallons) To Increase Chlorine level 1mg/l (ppm) add 17g To increase Chlorine level 5mg/l (ppm) add 88g
Pool Volume: 22730L (5000 gallons) To Increase Chlorine level 1mg/l (ppm) add 7g To increase Chlorine level 5mg/l (ppm) add 25g
Pool Volume: 45455L (10000 gallons) To Increase Chlorine level 1mg/l (ppm) add 7g To increase Chlorine level 5mg/l (ppm) add 25g
matt (verified owner) –
My pool went green so I added aquasplash shock granules few hours later water back clear again 100% recommended.