This product is used to increase the pH of your pool water. Proper pH control of pool and spa water is essential to eliminate problems caused by pH being too low or high. If pH is too low the water becomes uncomfortable for bathers. Add this product if your test kit result indicates that the pH is too low.
Directions for use:
Test the pH of your water on a regular basis. The pH of your water should be
maintained between 7.2 and 7.8 with an ideal reading of 7.4. This will allow the most effective use of other swimming pool chemicals. If the reading is below 7.2, add this product at the rate of 500gm per 45m³
Pre-dissolve the granules into 10 litres of water, using a clean plastic container
and mix carefully. Slowly pour the solution into the pool water near to the return
inlets and rinse container out thoroughly.
To obtain maximum benefit from the chlorine, the pH of the pool & spa water should be maintained around 7.4 and between 7.2 & 7.8 at all times. Above 7.8 the efficiency of the chlorine will be reduced.
Smaller Size of pH Increaser
5Kg AquaSplash pH Increaser (pH Plus +)
There are no reviews yet.