Chlorine Granules are for the disinfection of swimming pool & spa water. The granules are completely soluble and have little effect on the pH, containing a stabiliser to protect against loss of chlorine to sunlight.
Directions for use:
To maintain the chlorine level at a rate
of 2 to 3mg/litre (ppm) add 84g per
10,000 gallons per day. This daily rate is offered as a general guide for private pools.
Heavily used pools and those maintained
at higher temperatures may require
increased dosage. Test for actual requirements by using a poolside test kit, adjusting the dose rate as necessary.
Pre-dissolve the granules into 10 litres of water, using a clean plastic container
and mix carefully. Slowly pour the solution into the pool water near to the return
inlets and rinse container out thoroughly.
To obtain maximum benefit from the chlorine granules, the pH of the pool & spa water should be maintained around 7.4 and between 7.2 & 7.8 at all times. Above 7.8 the efficiency of the chlorine will be reduced
Kris H. (verified owner) –
Great product as described cheapest on the market plus quick delivery.
matt (verified owner) –
5 star quality product 100% recommended.