500ml AquaSplash Spa No Foam

Description

Due to the rapid circulation and aeration of spa water, unsightly foam can appear on the surface of the water, especially when oils and lotions are within the water. Aquasplash No Foam should be used regularly to prevent and control excess foaming. If excessive foaming is a continuous problem, partially drain the spa and refill with fresh water.

Directions for use:

Shake bottle before use and apply Aquasplash No Foam directly to the spa. When used as per the directions, foaming should rarely become a problem.

Application:

Add Aquaspalsh no foam at a rate of 50mls per 450litres of water. Add whilst the filtration system is running and allow to run on for at least 1 hour. Use 25mls per week or as a defoamer as required.