Stabilised Chlorine Granules are for the disinfection of swimming pool & spa water. The granules are completely soluble and have little effect on the pH, containing a stabiliser to protect against loss of chlorine to sunlight.
Chlorine granules for Swimming Pool and Spa, above ground pools like Intex, we are one of the biggest chlorine suppliers in the UK we specialise in Pool and Spa Supplies and we offer the best chlorine.
Directions for use:
To maintain the chlorine level at a rate
of 2 to 3mg/litre (ppm) add 84g per
10,000 gallons per day. This daily rate is offered as a general guide for private pools.
Heavily used pools and those maintained
at higher temperatures may require
increased dosage. Test for actual requirements by using a poolside test kit, adjusting the dose rate as necessary.
Pre-dissolve the granules into 10 litres of water, using a clean plastic container
and mix carefully. Slowly pour the solution into the pool water near to the return
inlets and rinse container out thoroughly.
To obtain maximum benefit from the chlorine granules, the pH of the pool & spa water should be maintained around 7.4 and between 7.2 & 7.8 at all times. Above 7.8 the efficiency of the chlorine will be reduced
Our pH balancers: